Intelligent Portable Vehicle Jammer Rcied Eod Bomb Signal Jammer 20-6000MHz Ai Technology

PRODUCTS

Vehicle Jammer 20Mhz-6G

Product Name：	Intelligent Portable Vehicle Jammer Rcied Eod Bomb Signal Jammer 20-6000MHz Ai Technology
Part number：	PTC-V24P-AI
Contact：	Mobile/WhatsApp/Wechat: 86-13632977933
Parameters：	Technical Specifications: RF Technical Parameters: Total Output Power: only need 480Watts for 2jammer cases for jamming up to100m-300m Working Channels: 12CH Jamming Frequency Range: 20-6000MHz for optioin Jamming Range: >100 meters radius depending on the several conditions such as transmitter frequency and output power distance to receiver and obstacles etc. Internal Modulation: AI Detection and Jamming Technology Signal Source: AI Detection and Jamming Module Power Supply: 220VAC/28VDC Power Consumption: 750W for each jammer case Jamming target: HF VHF UHF 2G&3G&4G&5G mobile phone signals WIFI 2.4G&5.8G Sweep rate: Fixed

Online Consultation Return

Product Details：

Product Description:

The Vehicle Mounted Jammer 's Operating System can be fully controlled from the driver's seat to ensure the optimal user experience. Our vehicle mounted Counter-IED Jammers have 360 degree protection, and are thus able to protect other vehicles in the convoy.

Convoy Jammer for protecting VIP(Very Important Person). RF jamming systems make an appearance during speeches, radio jamming systems become part of the social norm.

There are many discussions on Vehicle Mounted Jammer and the limit of mobile phone communications. when considering the deadly nature resulting from the use of remote controlled weapons, the Vehicle Mounted Jammer and VIP Convoy Jammers used today are an necessity.
This system consists of broadband algorithm system and Jamming modules for working on 20-6000MHZ signals.
The whole system is powered by strong batteries.

Working Frequencies	20-6000mhz for option
Working Channels	24CH
Total Output Power	480W
Jamming Range	100-500meters, depend on local signal Strength
Internal Modulation	AI Detection and Jamming Technology
Signal Source	AI Detection and Jamming Module
Power Supply	220VAC/28VDC
Power Consumption	1500W
Jamming target	HF, VHF, UHF, 2G&3G&4G&5G mobile phone signals, WIFI 2.4G&5.8G

Module	Working Channel	Working Frequencies	RF Power	Jaming Targets
Module 1	Channel 1	20-400MHz	200W	HF, VHF Walkie-talkie, Reomote controller
Module 2	Channel 2	400-800MHz	100W	UHF, Walkie-talkie, Reomote controller
Module 3	Channel 3	800-1200MHz	100W	Walkie-talkie, Reomote controller
Module 4	Channel 4	1200-1600MHz	100W	Reomote controller, GPS, BDS, GLONASS
Module 5	Channel 5	1600-2000MHz	100W	Reomote controller, GPS, BDS, GLONASS
Module 6	Channel 6	2000-2400MHz	100W	Reomote controller
Module 7	Channel 7	2400-2800MHz	100W	Reomote controller, WiFi
Module 8	Channel 8	2800-3200MHz	50W	Reomote controller
Module 9	Channel 9	3200-3600MHz	50W	Reomote controller
Module 10	Channel 10	3600-4000MHz	50W	Reomote controller
Module 11	Channel 11	4000-4400MHz	50W	Reomote controller
Module 12	Channel 12	4400-4800MHz	50W	Reomote controller
Module 13	Channel 13	4800-5200MHz	50W	Reomote controller, WiFi
Module 14	Channel 14	5200-5600MHz	50W	Reomote controller, WiFi
Module 15	Channel 15	5600-6000MHz	50W	Reomote controller, WiFi
Module 16	Channel 16	870-880MHz	100W	Mbl: 800MHz
Module 17	Channel 17	935-960MHz	100W	Mbl: 900MHz
Module 18	Channel 18	1805-1880MHz	100W	Mbl: 1800MHz
Module 19	Channel 19	1880-1920MHz	100W	Mbl: 4G LTE- TDD
Module 20	Channel 20	2300-2390MHz	100W	Mbl: 4G LTE- TDD
Module 21	Channel 21	2515-2675MHz	100W	Mbl: 4G LTE- TDD
Module 22	Channel 22	3400-3600MHz	100W	Mbl: 5G LTE- TDD
Module 23	Channel 23	3600-3800MHz	100W	Mbl: 5G LTE- TDD
Module 24	Channel 24	4800-5000MHz	100W	Mbl: 5G LTE- TDD
TOTAL			2100W

Power Amplifier Protectors:

A. Over- Heat protection – Thermal protector

B. Over current protection

C. High input Voltage and low Voltage protection

D. VSWR protection: against antenna miss-match including open and short circuit

Cooling: Heat sink and air forced fans

Physical Data:

Net Weight of Jammer Host: about 35kgs

Dimension: 430*220*630mm

Proof Level: IP54

Environment of operation:

Operating Temperature: -10ºC - +50ºC

Humidity: 5% - 90%

AI Detection and Jamming technology for high efficiency;
Specially designed with Intelligent (AI) technology to block 20-6000mhz with no GAP in 2 high quality portable Jammers. Easily move on some bumpy uneven roads. Resistance to bumps and falls.
Fully rainproof design available for some rainy climates. Compound by high IP grade waterproof parts to ensure high waterproof capabilities rain.
Modular construction for easy removal and connection, maintenance, repair and upgrade.
Delicate ventilation design and heat sink built into the case to ensure uninterrupted work.
The system contains up to 24 different inhibition modules simultaneously to cover all frequencies bands.
Each module LCD display shows the operating frequency, power output, VSWR, amperage,voltage and temperature on the handheld control panel and also on the computer software.
Each module with its antenna can be used as a complete unit.
Each module can be controlled individually. Plug and Play programming.
Equipped with a wired remote control waterproof panel. The operator can turn ON / OFF each module and control and jammer via the wired remote control.
Supports 5 hours rechargeable battery with battery indicator light and with the battery level indiction. More batteries for option.
There is a LCD screen on the control panel of the equipment to indicate the level Of battery.
The Jammer specially designed for mounted in vehicle, which is the best advantage of the system. It has been combined all entire frequency bands installed in vehicle, equipped with vehicle mount antennas as required.
Support Wired remote control and also computer remote monitoring
Hidden design: except for the 2 VHF antennas, all other antennas are built in the roof antenna box.
Strong Jamming effect with warranty range, the traditional Jamming solution would fail when the environmental signal strength is very strong or close to BTS, but we warranty our jamming system work stable.

Remote Control:

IR Remote control or Wired remote control and NMS( Network management system) monitoring software both can be available.

IR Remote control or Wired remote control for option.

NMS Software Control functions:

a. Working Frequency bands and Output Power Controllable by Software
b. Output Power and VSWR Alarming status
c. Remote Monitoring software to adjust the RF Power of each Band
d. Power Amplifier ON/OFF of each Band by Software

：深圳网站建设